[En-Nut-Discussion] PPP and TCP/IP

[Mike Cornelius]

Hi Adrian,

Do you mean a complete Bluetooth stack (radio and all) or are you just
looking for the multiplexor driver (RFCOMM)?
If it is the former I wish you the best of luck finding a free one.
If it is the latter I can supply a GSM TS 07.10 multiplexor driver for
Nut/Os, RFCOMM is based on 07.10 so it should be pretty close to what you
need.
In fact the official 07.10 spec is somewhat ambigous in places and without
reference to the RFCOMM spec I doubt I would have been able to make it work.

Let me know if you're interested.

Regards,

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Mike Cornelius                      Internet: mikec at calldirect.com.au
Call Direct Cellular Solutions      Phone:    +61 2 99-65-75-85
Level 1 8-22 West St North Sydney   FAX:      +61 2 99-65-75-90
NSW 2060 Australia                  URL:      http://www.calldirect.com.au
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


-----Original Message-----
From: en-nut-discussion-admin at egnite.de
[mailto:en-nut-discussion-admin at egnite.de]On Behalf Of Adrian Thearle
Sent: Saturday, October 26, 2002 2:28 PM
To: en-nut-discussion at egnite.de
Subject: RE: [En-Nut-Discussion] PPP and TCP/IP


Hi Iker

Is this Bluetooth stack of yours going to be available?

I am keen to start something with Bluetooth and already have a few
places where it would be really handy. I wasn't able to find any AVR
Bluetooth stacks on the net, so they are in short supply and it would be
really nice not to have to write one from scratch.

Cheers

Adrian


-----Original Message-----
From: en-nut-discussion-admin at egnite.de
[mailto:en-nut-discussion-admin at egnite.de] On Behalf Of Iker Uribesalgo
López
Sent: Friday, 25 October 2002 12:22 AM
To: en-nut-discussion at egnite.de
Subject: [En-Nut-Discussion] PPP and TCP/IP


Hi,

    I am working in a project about TCP/IP over GPRS and over Bluetooth
for a microcontroller Atmel AVR. I have found several implementations of

TCP/IP stack for Atmel but all uses an Ethernet interface to
communicate, included Ethernut Nut/Net. I would need to find an
implementation of the PPP protocol that will work in Atmel AVR to
comunicate over serial port to the modem (in the case of GPRS). Someone
knows some free implementation of protocol PPP?
    I have read something related to PPP in this list makes a pair of
day, what about this?

Thanks in advance,
Bye.


_______________________________________________
En-Nut-Discussion mailing list
En-Nut-Discussion at egnite.de
http://www.egnite.de/mailman/listinfo/en-nut-discussion

_______________________________________________
En-Nut-Discussion mailing list
En-Nut-Discussion at egnite.de
http://www.egnite.de/mailman/listinfo/en-nut-discussion