[En-Nut-Discussion] Building Medianut and/or LCD-display add-on

[Janne]

Now, that clears a lot. Thanks !


> -----Original Message-----
> From: en-nut-discussion-admin at egnite.de 
> [mailto:en-nut-discussion-admin at egnite.de] On Behalf Of Jelle 
> Martijn Kok
> Sent: 15. tammikuuta 2003 17:15
> To: en-nut-discussion at egnite.de
> Subject: Re: [En-Nut-Discussion] Building Medianut and/or 
> LCD-display add-on
> 
> 
> Is this what you are looking for ?
> 
> Sandwich:
> http://www.youcom.nl/Images/Jelle/Pic00001.jpg
> 
> Standing up:
> http://www.youcom.nl/Images/Jelle/Pic00002.jpg
> 
> Standing up with LCD: http://www.youcom.nl/Images/Jelle/Pic00003.jpg
> 
> Jelle
> 
> ----- Original Message -----
> From: <janne.jarvinen at pp8.inet.fi>
> To: <en-nut-discussion at egnite.de>
> Sent: Wednesday, January 15, 2003 1:53 PM
> Subject: [En-Nut-Discussion] Building Medianut and/or 
> LCD-display add-on
> 
> 
> > I am a little bit confused about connector between add-on boards and
> Ethernut main board.
> > What does this mean:
> > "Two sides of the the board may be plugged into the 
> Ethernut expansion
> connector. This offers the possibility to install both boards 
> either in the sandwich way(x1+x2) or side by side(x3+x4)"
> >
> > Cannot find anything related to X1-X4 in Ethernut 
> documentations. Only 
> > one
> simple 64pin header incl.Ports,addr,data etc.
> > Cannot either understand what means "both boards" ?
> >
> > So for some way, both Medianut and LCD boards can be 
> conencted at the 
> > same
> way ?
> >
> > Does somebody have pictures of ready build bords ?
> >
> > Regards,
> >
> > -Janne-
> >
> >
> >
> > _______________________________________________
> > En-Nut-Discussion mailing list
> > En-Nut-Discussion at egnite.de 
> > http://www.egnite.de/mailman/listinfo/en-nut-discussion
> >
> 
> _______________________________________________
> En-Nut-Discussion mailing list
> En-Nut-Discussion at egnite.de 
> http://www.egnite.de/mailman/listinfo/en-nut-> discussion
>