[En-Nut-Discussion] http server problems

[Michel v.d. Net]

Hello Herald,

I started nutconf and my UserConf.mk looks like this:

MCU=enhanced
BURN=$(top_srcdir)\tools\win32\uisp
BURNFLAGS=-dprog=stk500 -dserial=/dev/ttyS0 -dspeed=115200 -dpart=atmega128 --erase --upload if=$(TARG)
CRUROM=$(top_srcdir)\tools\win32\crurom
AVR=c:\iccavr
HWDEF=-DETHERNUT2

I still have the same problems, any other ideas.

:-) Michel

> -----Oorspronkelijk bericht-----
> Van:	Harald Kipp [SMTP:harald.kipp at egnite.de]
> Verzonden:	dinsdag 6 januari 2004 10:55
> Aan:	Ethernut User Chat (English)
> Onderwerp:	Re: [En-Nut-Discussion] http server problems
> 
> Michel,
> 
> >
> >Nut/OS 3.3.2.1 HTTP Daemon...Registering device 
> >failed
> >EEPROM/DHCP/ARP config 
> >failed
> >192.168.214.250 ready
> >
> >But 192.168.214.250 is not ready, because there is no network connection.
> >Only the red led on the Ethernut 2.0 board is on, i can't seem to register 
> >the Ethernet controller.
> >
> >NutRegisterDevice(&DEV_ETHER, 0x8300, 5) always returns -1
> >
> >Basemon works fine.
> >Hopefully somebody can help me with this problem.
> 
> Looks like you forgot to run nutconf to configure
> the correct Ethernet Controller. It's in the nut
> installation directory.
> 
> On some machines it fails to run. It creates the
> proper entries in UserConf.mk. For the Ethernut 2
> the last entry should read
> 
> HWDEF=-DETHERNUT2
> 
> Harald
> 
> _______________________________________________
> En-Nut-Discussion mailing list
> En-Nut-Discussion at egnite.de
> http://www.egnite.de/mailman/listinfo.cgi/en-nut-discussion