[En-Nut-Discussion] External Interrups

[Ronald Lokker]

thanks Harald i see it in the drawings and i assum that in sheet 1 al athers going to the expantion connector !
and also Cosmin

-----Oorspronkelijk bericht-----
Van: en-nut-discussion-bounces at egnite.de
[mailto:en-nut-discussion-bounces at egnite.de]Namens Harald Kipp
Verzonden: dinsdag 26 oktober 2004 15:25
Aan: Ethernut User Chat (English)
Onderwerp: Re: [En-Nut-Discussion] External Interrups


Hi Ronald,

INT5 is already used for the LAN Controller Interrupt.
If you look to the schematics sheet 3, you can see that
you can chage this to INT6 by removing R2 and mounting
R31 (on the back side).

But that would also require to change the driver or use
the Configurator with Nut/OS Version 3.9.3.

Harald


At 15:04 26.10.2004 +0200, you wrote:
>hello Super ethernut group
>
>I have a problem whit using external Interrupts int5 connected on pin 
>oc3c/int5/poort PE5 it looks like is programmed as output voor wave
>
>i'm using ethernut hardware v2.1 and os v342
>
>i dont know of it is initalizised in the os
>
>or somebody can tell me how can i tur it off an d how i can used as 
>interupt pin int5
>
>i used 4 external interrupts and int 4,6,7 works fine
>
>i am waiting for a hopefule ansswere
>
>ps my englisch are bad sorry for that
>
>ronald lokker
>
>rlokker at worldonline.nl

_______________________________________________
En-Nut-Discussion mailing list
En-Nut-Discussion at egnite.de
http://www.egnite.de/mailman/listinfo.cgi/en-nut-discussion
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

NOTE: The information transmitted in this email is for the person or entity to which it is addressed: it may contain information that is confidential and/or legally privileged. If you are not the intended recipient, please do not read, use, retransmit or disseminate this information. Although this email and any attachments are believed to be free of any virus, it is the responsibility of the recipient to ensure that they are virus free. No responsibility is accepted by the KROHNE Company for any loss or damage arising from receipt of this message. Furthermore, unless explicitly stated, this email is in no way a legally binding agreement. The views represented in this email do not necessarily represent those of the corporation.