[En-Nut-Discussion] Gateway

[Hermann Schulz]

Hi All,

I have a problem with the Gateway.
I've developed a control system with 10 relays, 10 digital inputs,
4 serial Interfaces, 32kByte Ram, LAN 91C111 and the ATMega128.

Software: ethernut 3.9.3, Compiler ImageCraft V6.3.
Tested in Linux network.

The communicating goes over UDP protocol. Sometimes it is necessary that
the response from the Io's or serial interface go into another Network.

In the configuration (Telnet) the customer has the possibility to change
The IP, Gateway, destination IP's, Port numbers and so on.

But when they use the gateway function the response from the control
system
goes never in the other network.

Example: Control IP 192.168.110.126     Gateway 192.168.110.1   
Destination      IP 192.168.115.50

Can anybody help me? 

Best regards
Hermann Schulz