[En-Nut-Discussion] Cannot ping my ethernut

[Pan-Wei Ng]

Thanks,

It seems that I need to power-off the board for the DHCP to work.

<pwng/> 

-----Original Message-----
From: en-nut-discussion-bounces at egnite.de
[mailto:en-nut-discussion-bounces at egnite.de] On Behalf Of Pan-Wei Ng
Sent: Thursday, June 02, 2005 2:03 AM
To: en-nut-discussion at egnite.de
Subject: [En-Nut-Discussion] Cannot ping my ethernut

Hi,

I just bought Ethernut kit. So I am really a newbie to this board. So, I got
my terminal and Ethernut started up. Then I reset and activate base mon.
Here is what I get:


External RAM Test... 28416 bytes
Banked RAM Test...   none
Detecting NIC...     RTL8019AS
Testing NIC...       OK
I/O Port Test...     OK

Press any of the following keys:
    B - Send broadcasts
    E - Ethernet controller read/write
    J - Jump to bootloader
    S - SRAM read/write
    X - Exit BaseMon, configure network and start WebServer

I press "X"

MAC address  (000000010539):
IP address   (0.0.0.0):
Using DHCP or ARP method (Y):

After a while, I get

MAC  00-00-00-01-05-39
IP   111.111.1.103
Mask 255.255.255.0
Gate 111.111.1.1
HTTP server running. URL http://111.111.1.103/

My Ethernut is connected to a router which issues an address to ethernut.
The address 111.111.1.103 is issued by my router.

Now, on my browser, I visit http://111.111.1.103/ and
http://111.111.1.103/index.html but I got nothing.

I ping 111.111.1.103, and I get no response from Ethernut. Can anyone tell
me why?

<pwng/>
 

_______________________________________________
En-Nut-Discussion mailing list
En-Nut-Discussion at egnite.de
http://www.egnite.de/mailman/listinfo.cgi/en-nut-discussion