[En-Nut-Discussion] how to program the ethernut

[Thiago A. Corrêa]

I don't know what is uC, but a locked processor does read "something"
in the ponyprog, it reads some garbage data, but doesn't give you
"device not found". I do know that it is a bit hard to setup pony, it
had issues with many pcs where I work... something with the LPT that I
can't quite figure out. One thing I always do is set it to ECC+EPP in
the bios, seams to work sometimes. Also, my working machine has the
LPT1 in 0x378, that info might be helpfull.

I don't have the scheme for the programmer I'm using right now, but I
can send you a link on monday if you want, we built ours with some
spare parts, not hard to assemble :)

On 11/25/05, Klemen Dovrtel <klemen_dovrtel at yahoo.com> wrote:
> I connected the vcc, gnd, miso, mosi, sck and rst (i
> removed r22 and added r34) to my ponyprog programmer
> and try to read data from uC, but i get an error
> (device missing). I am shure that the connsetions are
> ok, and the programmer is ok. The ethernut board is
> new. Why is that? Is the uC locked?
>
>
>
> __________________________________
> Yahoo! Music Unlimited
> Access over 1 million songs. Try it free.
> http://music.yahoo.com/unlimited/
> _______________________________________________
> En-Nut-Discussion mailing list
> En-Nut-Discussion at egnite.de
> http://www.egnite.de/mailman/listinfo.cgi/en-nut-discussion
>