[En-Nut-Discussion] Re: Re: Adding LCD, Keyboard,...

[Brett Abbott]

Hi

A bit late on responding to this one but...  There is an I2C device 
which runs both a numeric keypad and LCD which would free up most of 
your io for ADC, PWM etc.

Have a look at LCD02 - I2C/Serial LCD
on: http://www.robot-electronics.co.uk/htm/Lcd02tech.htm

If you follow it up, I'd be interested in the price.

Cheers
Brett

Dan Morphis wrote:

>Given your requirements (Graphical LCD, Keyboard, ADC, PWM) I don't think
>the Ethernut 1.3G will fit your needs.  Maybe someone else on the list has
>some ideas.
>
>-dan
>
>On 2/21/06, Tolga Onbay <tolgaonbay at gmail.com> wrote:
>  
>
>>But I don't want to use ARM.. Any suggestion?
>>
>>    
>>
>>>Tolga,
>>> I think you would be a little bit stretched to add this stuff to the
>>>Ethernut 1.3G.  But I do know of another embedded system which might suit
>>>your needs better.  Technologic Systems has a bunch of ARM9 based PC104
>>>sbc's (http://www.embeddedarm.com/epc/prod_SBC.htm).  They also just
>>>announced the TS-7300 (http://www.embeddedarm.com/epc/ts7300-spec-h.
>>>htm) which has vga out, as well as a bunch of DIO so you could bit-bang
>>>      
>>>
>>PWM,
>>    
>>
>>>and has a 12-bit ADC.
>>>      
>>>
>>>One of the big differences between the Ethernut series and the TS-7xx0
>>>products is the TS stuff uses a Linux with a 2.4 series kernel for it's
>>>      
>>>
>>OS
>>    
>>
>>>(Which is not a RTOS) and the Ethernut uses its own OS, which if I recall
>>>correctly is an RTOS (somebody correct me if I'm wrong please!).
>>>      
>>>
>>>I hope this helps!
>>>      
>>>
>>>-dan
>>>      
>>>
>>_______________________________________________
>>En-Nut-Discussion mailing list
>>En-Nut-Discussion at egnite.de
>>http://www.egnite.de/mailman/listinfo.cgi/en-nut-discussion
>>
>>    
>>
>_______________________________________________
>En-Nut-Discussion mailing list
>En-Nut-Discussion at egnite.de
>http://www.egnite.de/mailman/listinfo.cgi/en-nut-discussion
>
>
>  
>

-- 
-----------------------------------------------------------------
Brett Abbott, Managing Director, Digital Telemetry Limited
Email: Brett.Abbott at digital-telemetry.com
PO Box 24 036 Manners Street, Wellington, New Zealand
Phone +64 (4) 5666-860  Mobile +64 (21) 656-144
------------------- Commercial in confidence --------------------