[En-Nut-Discussion] Ethernut 3 TFTPD32 0 bytes send

[Brian Davis]

I know it sounds kind of simple but when I see repeated requests that it
usually means I've mis-typed the image filename when configuring Bootmon.

On 6/12/06, Martin Ludwig <mludwig at adc-elektronik.de> wrote:
>
> Hello ,
>
> i try  to make the first steps with the new 3.0 board.
> In the Terminalwindow i see that bootmon 1.0.2 is running. I type in ip
> and so on but TFTPD32  isn´t responding.
> On then same 10Mbit  Port where i  work with the older 2.1 Board the new
> one don´t answers.
> Than i try a 100 MBit  direkt link via a cross-linked kabel.
>
> TFTPD32  answers then following.
>
> Connection received from 192.168.2.35 on port 1024 [10/06 12:58:21.140]
> Read request for file <threads.bin>. Mode octet [10/06 12:58:21.140]
> Connection received from 192.168.2.35 on port 1024 [10/06 12:58:27.234]
> Read request for file <threads.bin>. Mode octet [10/06 12:58:27.250]
> Connection received from 192.168.2.35 on port 1024 [10/06 12:58:33.343]
> Read request for file <threads.bin>. Mode octet [10/06 12:58:33.343]
> TIMEOUT waiting for Ack block #1  [10/06 12:58:46.156]
>
> and window appears "0 Bytes transfered"
>
> i tried many things to solve , but now i have no idea what to do.
>
> thanks for any hint
> Martin
> _______________________________________________
> En-Nut-Discussion mailing list
> En-Nut-Discussion at egnite.de
> http://www.egnite.de/mailman/listinfo.cgi/en-nut-discussion
>