[En-Nut-Discussion] installation problem: Ethernut V 1.3G

[Michael Gong]

Never mind. I should take off the MINI adapter, and a DB-9 male 
connector shows up.

----- Original Message ----- 
From: "Michael Gong" <mwgong at cs.toronto.edu>
To: "Ethernut User Chat (English)" <en-nut-discussion at egnite.de>
Sent: Monday, November 27, 2006 1:19 PM
Subject: [En-Nut-Discussion] installation problem: Ethernut V 1.3G


> Hi,
>
> The Ethernut Version 1.3 Hardware User's Manual (p.7) says:
>
> "2. Connect Ethernut's DB-9 RS232 port to an available COM port using
> the serial cable".
>
> I assume the "serial cable" is the long cable included in the Ethernut
> Kit. Is it correct ?
>
> The long cable has 2 heads, one says "MINI ADAPTER" , "SERIAL PORT
> ADAPTORS D9/D25", and the head has 9 holes. The problem is that I 
> can't
> use it to connect the DB-9 RS232 port on the Ethernut board, but the
> cable and the port don't match.
>
> What should I do ?
>
> Regards,
>
> Mike
>
> _______________________________________________
> En-Nut-Discussion mailing list
> En-Nut-Discussion at egnite.de
> http://lists.egnite.de/mailman/listinfo/en-nut-discussion
>