[En-Nut-Discussion] Errors building Ethernut 4.4.1

[Lasse Conrad]

Hi Gerard

Not sure this will help you but try to check your PATH to see if any other
compiler is in the way. 

Best Regard
Lasse


-----Oprindelig meddelelse-----
Fra: en-nut-discussion-bounces at egnite.de
[mailto:en-nut-discussion-bounces at egnite.de] På vegne af Gerard de
Vries|United Live Graphics|
Sendt: Tuesday, July 08, 2008 12:39 PM
Til: Ethernut Mailing List
Emne: [En-Nut-Discussion] Errors building Ethernut 4.4.1

Hello everyone,

I'm a newbie on the subject of Ethernut and I'm trying to build Ethernut
4.4.1 for first use, but I keep on getting an error message while building
the OS.
These are the steps I take:
- Run "WinAVR-20071221-install.exe"
- Run "ethernut-4.4.1.exe"
- Run "Nut/OS Configurator"
  - Open file "ethernut13h-256gcc.conf" (I have an Ethernut Version 1.3
Revision H with an Atmel ATmega1218)
  - Click menu-item "Edit" followed by "Settings"
    - In tab "Repository" set "Repository File" to correct directory
    - In tab "Build" set "Source Directory", "Platform", "Build Directory"
and "Install Directory"
    - In tab "Tools" set "Tools Paths" to bin-directory and
utils/bin-directory of WinAVR
    - In tab "Samples" set "Programmer" to "avr-jtagice"
    - In tab "Samples" set "Application Directory"
    - Save settings by clicking OK
  - In options-tree (left part of window) set in "Architecture", "Target
CPU" to "Atmel ATmega128"
  - Click menu-item "Build" followed by "Build NutOS"
    - At question "Do you like to generate this build tree?" click "OK"
    - At question "Do you like to build the Nut/OS libraries?" click "OK"

After 30 seconds or so, I get an error leaving the Nut/OS unbuild and the
log reporting as follows:
  12:21:37: Nut/OS Configurator Version 1.4.3
  12:21:37: Linked to wxWidgets 2.8.3
  12:21:37: Running on Windows XP (build 2600, Service Pack 3)
  12:21:37: Working in C:\Program Files\Ethernut
  12:21:42: Loading C:/Program Files/Ethernut/nut/conf/repository.nut
  12:21:42: Loading C:/Program
Files/Ethernut/nut/conf/ethernut13h-256gcc.conf
  12:21:42: OK
  12:22:06: Creating Makefiles for avr-gcc in E:/Projects/Ethernut/Builds
  12:22:06: Creating header files in E:/Projects/Ethernut/Builds
  12:22:06: OK
  12:22:15: ----- Running 'make clean' -----
  12:22:15: Located C:\Program Files\Ethernut\nut\tools\win32\make.exe
  12:22:20: ----- 'make clean' terminated successfully -----
  12:22:20: ----- Running 'make all' -----
  12:22:20: Located C:\Program Files\Ethernut\nut\tools\win32\make.exe
  make[1]: *** No rule to make target `avr/os/context_gcc.o', needed by
`libnutarch.a'.  Stop.
  make: *** [all] Error 2
  12:22:20: ----- 'make all' failed with error 2 -----

Could someone please help me out and tell me what I'm doing wrong or point
me to a combination of WinAVR and Ethernut that does let itself be build.
Thanks!

Kind regards,
Gerard



United Broadcast Facilities
Gerard de Vries, United Live Graphics


      T +31 (0)35 77 33 203 
      F +31 (0)35 77 33 131 
      M +31 (0)6 25 05 11 56 



Naarderweg 16, 1217 GL Hilversum, Nederland

©
Alle bestanden die met deze e-mail zijn meegestuurd vallen onder het
copyright van United Broadcast Facilities.
All files attached to this e-mail are under copyright of United Broadcast
Facilities.

_______________________________________________
http://lists.egnite.de/mailman/listinfo/en-nut-discussion