[En-Nut-Discussion] Ethernut 3.0e NPL upgrade problems

[x1]

Harald,
Tried both NPL files in the ARC directory and made the edits to npl30e.v
suggested by Martin,  none of them work.
With so little success I am wondering if I am doing something wrong. But
running Query NPL does show a change in versions.
Not adding the new variable as martin had suggested did cause a compile
failure. Every time I run the NPL updated I get a similar message to:

100 XSVF-Executor 1.2.0 on Nut/OS 4.9.2.0
199 OK


Also My PHAT test code I am using is from:
http://www.ethernut.de/nutwiki/Nut/OS_Examples#Filesystem
When I run the write file, read dir, and read dir they all work fine using
my 32Mb SD card and my Olimex AT91SAM7X256 board

I also have a 64mb SD card a that also fails on my 3.0e board

I do not have a way to scope out the signals on the SD card slot.
Regards
Tim


On 7/27/2009 2:16:34 PM, Harald Kipp (harald.kipp at egnite.de) wrote:
> Sorry for not responding earlier. The trouble is, that I had to stop in
> the middle of upgrading the CPLD for Ethernut 3.1. I need to sort out a
> few things first and will come back to you as soon as possible.
>
> Since then:
>
> Did you try
> npl30d-v7.zip
> npl30e-v6.zip
> available at
> http://www.ethernut.de/arc/
> ?
>
> The Verilog sources may fail when using later versions of the Xilinx
> tools. Some time ago Martin provided a solution for this
>
> http://www.nabble.com/Ethernut-3-PHAT-MMC-Card-td15720204.html#a15878021
>
> This worked here on our Ethernut 3.1 prototype and will probably work on
> 3.0 too.
>
>
> Harald
>
> _______________________________________________
> http://lists.egnite.de/mailman/listinfo/en-nut-discussion