[En-Nut-Discussion] Fwd: RE: Reprogramming

[macsmaker at aol.com]

I (think) I know what I want to do, just not sure the best (canonical) method of getting there.
 
What I *think* I need is (this is for an Ethernut 1.3 with an Atmel128 running Nut/OS:
1. Build a bootloader. Looks like I have two to choose from: eboot in the Ethernut 1.3 examples or
    avr109. I think the Ethernut example has at least enough of a protocol stack to communicate with
    the TFTP server. I have not research the avr109 yet.
    The bootloader needs to be loaded at hex 0000.
2. Figure out how big the bootloader is in bytes.
3. Figure out the fuse settomgs to divide the flash into two sections, the smaller of which is *just* large
    large enough to hold the bootloader.
4. Add a command to my app to force a jump to the bootloader code (at hex address 0000?)
5. Compile my app, and make sure the linker puts the proper starting address in.
6. Use avrdude and the STK500 to set the fuses and then load each hex file.
7. It's my understanding eboot will accept a binary from the host when the software is to be updated. 
    The server will issue some sort of "update software" command (using an HTTP message) which
    will cause my app to jump to 0x0000. Not sure what handshaking needs to take place to start the 
    file transfer, or what to do for disaster recovery.
 
Does this make sense to anyone who has done this? I'm kind of flying blind here and have a deadline to meet.
 
Pete Allison

 


-----Original Message-----
From: Thiago A. Corrêa <thiago.correa at gmail.com>
To: Allister G. Mannion <allister at nowatt.com>; Ethernut User Chat (English) <en-nut-discussion at egnite.de>
Sent: Mon, Jan 25, 2010 10:07 am
Subject: Re: [En-Nut-Discussion] Fwd: RE: Reprogramming




Hi, 
 
On Mon, Jan 25, 2010 at 1:32 PM, Allister G. Mannion 
<Allister at amannion.com> wrote: 
> Hi Ole, 
> 
> I have a similar requirement (might be the same as Peter's) where I want 
> to keep the eboot code as part of my 'firmware'. At the moment I load 
> (flash) it as a standalone, then flash my code (without the erase cycle) 
> which always gets executed first. The reason I want the 'eboot' code 
> there is so I can jump to it to tftp a new version of my firmware.