[En-Nut-Discussion] STM32F103 - ADC

[Achim]

Hi Uwe,

than´s for your comment. I hope Ulrich will give some commentŠ

For me it looks a little bit strange, because in the c-file register bits
are set which are not available in the STM32 control registers - even not
with similar names. Hence I´ve no idea how to define the missing registers.

Achim



On 10.05.13 13:46, "Uwe Bonnes" <bon at elektron.ikp.physik.tu-darmstadt.de>
wrote:

>>>>>> "Achim" == Achim  <achim_muc1971 at gmx.de> writes:
>
>    Achim> Hi, what´s the stud of the ADC implement ion for STM32?  I´ve
>    Achim> modified the configuration files. Afterwards ADC 1,2 is active
>in
>    Achim> the qnutconf common device section, but the adc-files are not
>    Achim> added to the make-file and not compiled.
>
>Hello Achim,
>
>I have not worked on the ADC with NUT, so the status is what Ulrich
>did. Probably also some bit-rot will have happend.
>
>I did some coding however on the bare STM32L ADC, but that is probably not
>easy reusable.
>
>Bye
>-- 
>Uwe Bonnes                bon at elektron.ikp.physik.tu-darmstadt.de
>
>Institut fuer Kernphysik  Schlossgartenstrasse 9  64289 Darmstadt
>--------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------
>_______________________________________________
>http://lists.egnite.de/mailman/listinfo/en-nut-discussion