[En-Nut-Discussion] Ethernut with SPI Ethernet Chip

[Balázs Vincze]

I dont have external ram and the hardware is home made so i can modify
it easily. My other chose is an at91sam7x chip but it will my first
32bits processor.

2013/9/30, bon at elektron.ikp.physik.tu-darmstadt.de
<bon at elektron.ikp.physik.tu-darmstadt.de>:
>>>>>> "Balázs" == Balázs Vincze <vincze.balazs.87 at gmail.com> writes:
>
>     Balázs> I want to connect At90can128 with SPI Ethernet to make a bridge
>     Balázs> between can and Ethernet and other functions.
>
> Do you have external RAM? Otherwise even runnung Ethernut + CAN on the 4
> kiByte RAM of the AT90CAN128 requires to be very carefull with memory. Do
> you have already the hardware? Otherwise I propose to use a more powerfull
> chip.
>
> Bye
> --
> Uwe Bonnes                bon at elektron.ikp.physik.tu-darmstadt.de
>
> Institut fuer Kernphysik  Schlossgartenstrasse 9  64289 Darmstadt
> --------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------
> _______________________________________________
> http://lists.egnite.de/mailman/listinfo/en-nut-discussion
>