[En-Nut-Discussion] SOLVED: Basic loading of nut/OS applications via TFTP

[Nikolas Becker]

Hello Tim,

thanks for the help. Here is what happened: After trying the command tftpboot, U-boot answered:
*** ERROR: 'serverip' not set
So it looks like the u-boot manual is faulty, since there is nowhere mentioned that the parameter serverip has to be set. After setting this variable to the ip of my tftpserver, it is downloading the program and I was able to start it.
Perhaps another question: is it normal that the http-server example does not really work? I can connect to the server, but besides the basic index page, all links just return 404.

Mit freundlichen Grüßen
Sincères Salutations
Best regards 

pEMTec SNC
Nikolas Becker
Dipl.- Physiker
Entwicklung

6 rue Jules Verne 
BP 60147 
57603 Forbach Cedex 
  
Tel.:    +33 (0) 387.13.09.22
E-Mail: n.becker at pemtec.de
  
www.pemtec.de
www.pemtec.fr
Geschäftsführer/Gérance:
Dipl.-Ing. Hans Wacht
SNC au capital de 10 000 000 euros
RCS Sarreguemines B 450 696 752
Code APE 2841 Z


-----Ursprüngliche Nachricht-----
Von: en-nut-discussion-bounces at egnite.de [mailto:en-nut-discussion-bounces at egnite.de] Im Auftrag von Tim Schendekehl
Gesendet: Montag, 23. Juli 2018 17:22
An: en-nut-discussion at egnite.de
Betreff: Re: [En-Nut-Discussion] Basic loading of nut/OS applications via TFTP

Hello Nikolas,

as an alternative you could try the following commands in U-Boot:

dhcp
tftpboot 0x20000000 172.16.1.105:httpserv.bin
go 0x20000000

The first command initializes the network. The second command loads the image and the third runs it.

Best regards,
Tim Schendekehl

Am 23.07.2018 um 16:52 schrieb Nikolas Becker:

> Hello Tim,
>
> I'm sorry, while writing my mail, I totally forgot that ip-adress line. I tried it with it, it made no difference. I've added another log at the end of this mail, where I execute the correct commands. As you can see, it made no difference, unfortunately.
>
> Best regards
>
> 	Nikolas
>
> SAMBOOT 1.4 :  Type=3 Loading 0x42000 to 0x27000000  done
> OK
>
>
> U-Boot 2011.12 (Mar 28 2012 - 10:09:42)
>
> CPU: AT91SAM9XE
> Crystal frequency:   18.432 MHz
> CPU clock        :  180.634 MHz
> Master clock     :   90.317 MHz
> I2C:   ready
> DRAM:  128 MiB
> WARNING: Caches not enabled
> Flash: 512 KiB
> NAND:  1024 MiB
> MMC:   mci: 0
> DataFlash:AT45DB321
> Nb pages:   8192
> Page Size:    528
> Size= 4325376 bytes
> Logical address: 0xC0000000
> Area 0:	C0021000 to C0041FFF (RO) setup
> Area 1:	C0042000 to C00C5FFF (RO) uboot
> Area 2:	C00C6000 to C0359FFF (RO) kernel
> Area 3:	C035A000 to C03DDFFF (RO) nutos
> Area 4:	C03DE000 to C03FEFFF      env
> SF: Detected AT45DB321D with page size 528 Bytes, total 16.5 MiB
> In:    serial
> Out:   serial
> Err:   serial
> Net:   macb0: PHY present at 0
> macb0: Starting autonegotiation...
> macb0: Autonegotiation complete
> macb0: link up, 100Mbps full-duplex (lpa: 0xcde1)
> macb0
> Hit any key to stop autoboot:  3  0
> U-Boot> run setfactory
> Loading...
> ## Executing script at 20000000
> ## Resetting to default environment
> Enter MAC address and then execute 'saveenv' to store the new environment.
> Please enter 'ethaddr':
> U-Boot> setenv ethaddr 00:06:98:50:00:CA
> U-Boot>
> U-Boot> setenv tftpserverip 172.16.1.105
> U-Boot>
> U-Boot> setenv nut_image_name httpserv.bin
> U-Boot>
> U-Boot> saveenv
> Saving Environment to SPI Flash...
> SF: Detected AT45DB321D with page size 528 Bytes, total 16.5 MiB
> Erasing SPI flash...Writing to SPI flash...done
> U-Boot>
> U-Boot> run tftpbootnut
> macb0: PHY present at 0
> macb0: link up, 100Mbps full-duplex (lpa: 0xcde1)
> BOOTP broadcast 1
> DHCP client bound to address 172.16.1.87
> U-Boot>
> _______________________________________________
> http://lists.egnite.de/mailman/listinfo/en-nut-discussion

-- 
egnite GmbH
Erinstrasse 18
44575 Castrop-Rauxel
Germany

Fon: +49 (0) 23 05 / 44 12 56
Fax: +49 (0) 23 05 / 44 14 87

Email: tim.schendekehl at egnite.de

Internet: www.egnite.de  www.ethernut.de

Amtsgericht Dortmund HRB 19783
Geschäftsführung: Harald Kipp

USt-IdNr.: DE 189520047

_______________________________________________
http://lists.egnite.de/mailman/listinfo/en-nut-discussion