[En-Nut-Discussion] questions

[조상만]

Hello.

I have two questions.

1)
I tested my board with ping.

I connected RJ-45 and DB-9 connector with terminal emulator.

I pressed 'X' in terminal emulator and ping in DOS prompt s below.

MAC 00-06-98-00-00-00
IP 141.223.107.15
Mask 255.255.255.0
Add gateway 141.223.107.99
HTTP server running. URL http://141.223.107.15/index.html

C:\WINDOWS>ping 141.223.107.15

Pinging 141.223.107.15 with 32 bytes of data:

Reply from 141.223.107.15: bytes=32 time=3ms TTL=64
Reply from 141.223.107.15: bytes=32 time=3ms TTL=64
Reply from 141.223.107.15: bytes=32 time=2ms TTL=64
Reply from 141.223.107.15: bytes=32 time=2ms TTL=64

Ping statistics for 141.223.107.15:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 2ms, Maximum =  3ms, Average =  2ms


Yes, It's ok.
 In this time I disconnected the power and connected the power again.

I retried ping but I failed the test.

What is problem?

Is there TCP/IP stack in SRAM?

I don't understand.

2) 
Finally, Can I put SNMP protocol to my board(ethernut board)?

Is it possible?

  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.egnite.de/pipermail/en-nut-discussion/attachments/20020918/b107ed2a/attachment-0001.html>