[En-Nut-Discussion] Ethernut 2 - SMC91C111

[danny-cvs]

Hi! David
We also develop LAN91C111 on NutOS, but we only have 64K SRAM
until now we can:
1.  pass external loopback
2. link OK
but now we still cannot receive/transmmit packet! the controller cannot
issue the interrupt.
Are there any timing issue we should consider?

Danny
----- Original Message -----
From: "David Kanceruk" <davkan at shaw.ca>
To: <en-nut-discussion at egnite.de>
Sent: Tuesday, April 08, 2003 1:05 PM
Subject: [En-Nut-Discussion] Ethernut 2 - SMC91C111


> Message to Harald,
>
>    In March I noticed a message posted saying the Ethernut 2 will be
> using the SMC91C111 Ethernet controller. I worked extensively on a
> WindowsCE.net driver for this chip. The driver supplied by SMSC had many
> problems. I know the code for NUT will be far different, but if you want
> a second set of eyes to look at your code, of if you want to bounce some
> ideas off me, feel to contact me.
>
> Dave
>
> _______________________________________________
> En-Nut-Discussion mailing list
> En-Nut-Discussion at egnite.de
> http://www.egnite.de/mailman/listinfo/en-nut-discussion
>