[En-Nut-Discussion] Ethernut in Aus. Fast!

[NGB]

Toby

I can replace the realtek chip for you if you want, I have plenty of chips here 
and am specialised in fixing SMD boards.
Give me a call if you are interested:
0410527857 (I'm in melbourne)
Cheers

Nic


Quoting Toby Smith <s354335 at student.uq.edu.au>:

> Hello everybody.
> 
> I'm in panic mode at the moment. I need to get hold of another
> Ethernut board, QUICKLY! I'm in Brisbane, Australia. 
> 
> At this point in time, I'm willing to beg, borrow or pay for a working
> Ethernut board.
> 
> I'm supposed to be demonstrating my final year engineering thesis
> project on Wednesday. One component of the project consists of
> demonstrating some Elvin code running on an Ethernut board.
> 
> But I've just managed to destroy something on my Ethernut board. I was
> connecting some IDC sockets to the expansion board so I could drive
> some LEDs. When the socket was connected, no packets were able to be
> sent out on the network (which I though was very queer, since I was
> only connecting to the power pins). So I disconnected and reconnected
> the IDC connector, and restarted... Now the link light is always on
> and BASEMON reports the NIC id detection as failing (getting 0xFFFF
> instead of 0x5070).
> 
> So I believe I've managed to destroy the RTL chip, somehow.
> 
> Any help at all would be appreciated!
> 
> --Toby
> _______________________________________________
> En-Nut-Discussion mailing list
> En-Nut-Discussion at egnite.de
> http://www.egnite.de/mailman/listinfo/en-nut-discussion
> 




-------------------------------------------------