[En-Nut-Discussion] Mass storage and real-time clock daughter boardfor the Ethernut-2.

Douglas Pearless Douglas.Pearless at pearless.co.nz
Wed Oct 20 22:07:41 CEST 2004


Oops, my spell checker seems to have changed Michaels surname to Fisher,
should be Fischer, sorry Michael!

-----Original Message-----
From: en-nut-discussion-bounces at egnite.de
[mailto:en-nut-discussion-bounces at egnite.de] On Behalf Of Douglas Pearless
Sent: Thursday, 21 October 2004 9:06 a.m.
To: 'Ethernut User Chat (English)'
Subject: [En-Nut-Discussion] Mass storage and real-time clock daughter
boardfor the Ethernut-2.

Greetings people,

For a while I have had a MMC card attached to my Ethernut, with a crude FAT
file system.

Then in working with Michael Fisher, he modified his FAT on IDE/SD Card code
to also work on the MMC card (Thanks Michael!!) so we didn't end up with
lots of code doing similar things and I killed off my code.

Now, if anyone is interested, I will soon (about a month) have a low cost
daughter board design completed that adds up to 8MB-1GB non volatile storage
in the form of a industry standard MMC card, a battery backed up real-time
clock that detects power failure and notifies the CPU, and re-routes the
RS-485 interface to the same end of the board as all of the other external
connectors on the Ethernut-2 so you can put your project into an enclosure
with all of the connectors at one end.

I'd like some comments:

(1) Is this of interest and should therefore be published?

(2) I am considering using a particular Maxim RTC chip that allows me to
have a battery (or perhaps a 1 Farad capacitor) of such a size that the
Ethernut-2 could operate long enough to flush all of the FAT buffers to the
MMC and close files etc, and maybe send out an alert.

(3) How much current would a 1 Farad capacitor supply at 5v, and for how
long?

(4) Does the LM1086 have reverse voltage protection so that if my daughter
board is supplying power to the 5v line (and hence the 3.3v line) with no
input power to the LM1086, will this damage the LM1086.

(5) I may also add a reset button that can be accessed from the same side as
all the connectors are on so that the unit can be reset without having to
pull the power from the unit (when it is in an enclosure).

(6) In a later revision I was thinking of allowing the Ethernut to Boot and
self program from the MMC card, meaning that customers could be sent a new
MMC card (e.g. a cheap 8MB one) that reprograms their Ethernut without
requiring an engineer or on site visit, a good idea?

Douglas.

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.778 / Virus Database: 525 - Release Date: 15/10/2004
 

_______________________________________________
En-Nut-Discussion mailing list
En-Nut-Discussion at egnite.de
http://www.egnite.de/mailman/listinfo.cgi/en-nut-discussion

---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.778 / Virus Database: 525 - Release Date: 15/10/2004
 

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.778 / Virus Database: 525 - Release Date: 15/10/2004
 




More information about the En-Nut-Discussion mailing list