[En-Nut-Discussion] Jtag cables - Ethernut 2.1

[Brett Abbott]

Hi

We're going through the process of moving to Ethernut 2.1.  Could I ask 
if someone who is using the older JTAG with the new Ethenut could take a 
photo/make some pin out mappings along the lines of the JTAG cable page 
at the link:

http://www.ethernut.de/en/jtag/jtagconn.html

The hardware manual refers to the JTAG cable in the starter kit, but 
we've got a Ethernut 1.0 starter kit.  I suspect that it should just be 
straight through - pin-1 to pin-1, pin-2 to pin-2 etc.

:) Many Thanks
Brett

-- 
-----------------------------------------------------------------
Brett Abbott, Managing Director, Digital Telemetry Limited
Email: Brett.Abbott at digital-telemetry.com
PO Box 24 036 Manners Street, Wellington, New Zealand
Phone +64 (4) 5666-860  Mobile +64 (21) 656-144
------------------- Commercial in confidence --------------------