[En-Nut-Discussion] Unable to burn sample basemon.hex file to the new Ethernut 2.1b

[Andrej Fronc]

hi,
It looks like a problem of the uisp under Windows, I tried it with linux
uisp and it worked.
lg
Andrej

FRONC ANDREJ wrote:

>Hi,
>I tried to programm the sample basemon.hex into the ethernut 2.1b from
>the starter kit, but the process allways freeze:
>
>D:\data\dgs\ethernut\nutapp-21b\basemon>make burn
>uisp -dprog=stk500 -dserial=/dev/ttyS1 -dspeed=115200 -dpart=atmega128
>--erase -
>-upload if=basemon.hex
>Firmware Version: 49.50
>Atmel AVR ATmega128 is found.
>Uploading: flash
>
>At the begining chages the led on the programming adapter green and
>red, but after one or two seconds it changes to green and do nothing.
>
>I'm using the jtag connector.
>
>D:\data\dgs\ethernut\nutapp-21b\basemon>uisp -dprog=stk500
>-dserial=com2 -dspeed
>=115200 -dpart=atmega128 --rd_fuses
>Firmware Version: 49.50
>Atmel AVR ATmega128 is found.
>
>Fuse Low Byte      = 0x3f
>Fuse High Byte     = 0x83
>Fuse Extended Byte = 0xff
>Calibration Byte   = 0x00  --  Read Only
>Lock Bits          = 0xc0
>   BLB12 -> 0
>   BLB11 -> 0
>   BLB02 -> 0
>   BLB01 -> 0
>     LB2 -> 0
>     LB1 -> 0
>
>I'm beginer in Ethernut Thema. Do anybody have any idea whats wrong?
>
>mfg
>Andrej Fronc 
>
>____________________________________
>Vsetko o SuperStar
>http://superstar.atlas.sk
>
>_______________________________________________
>En-Nut-Discussion mailing list
>En-Nut-Discussion at egnite.de
>http://www.egnite.de/mailman/listinfo.cgi/en-nut-discussion
>
>
>  
>