[En-Nut-Discussion] Compiling Nut/OS for AT91

[Lars Andersson]

Harald,

> -----Original Message-----
> From: en-nut-discussion-bounces at egnite.de
> [mailto:en-nut-discussion-bounces at egnite.de]On Behalf Of Harald Kipp
> Sent: den 14 januari 2005 16:02
> To: Ethernut User Chat (English)
> Subject: Re: [En-Nut-Discussion] Compiling Nut/OS for AT91
> 
> 
> Hi Lars,
> 
> On Windows I used various GCC implementations. At least in the
> German distribution of the AT91EB40A there is a version from
> http://www.isystem.com/
> which worked out of the box. I also used the package from
> http://www.charmedlabs.com/
> which comes with the XPort 2.0. Finally there's arm-elf-gcc
> from cygwin. I'd recommend to install cygwin anyway.
> There's also
> http://www.siwawi.arubi.uni-kl.de/avr_projects/arm_projects/#winarm
> but haven't tried that one.

I'll try out the WinARM first, it seam like an interesting project
in the same spirit as WinAVR :)


/Lars

> 
> I looked to the SAM devices too and think, that Atmel made a
> smart move by offering these chips as replacements for 8-bit
> controllers. I'm missing the external address/data bus, but
> still, most interesting.
> 
> Harald
> 
> 
> At 23:50 12.01.2005 +0100, you wrote:
> >Hi All,
> >
> >I would like to compile Nut/OS to run on an AT91EB40A 
> evaluation board. As 
> >I nuderstand some simple functionality is already working, 
> like debug 
> >uart, when using the nutconfigurator. Are there any compiler 
> sugested to 
> >be used when doing this? I normally use WinAVR on my windows 
> system when 
> >working with my regular ethernut HW.
> >
> >The next step will be to start working with the comming 
> AT91SAM7xx devices 
> >as soon as I can get my hands on an evaluation kit. Does 
> anyone else have 
> >interest in these devices? I beleive these MCUs soon will be 
> shipped with 
> >some rather interesting interfaces :-)
> >
> >Regards,
> >Lars A. Andersson
> 
> _______________________________________________
> En-Nut-Discussion mailing list
> En-Nut-Discussion at egnite.de
> http://www.egnite.de/mailman/listinfo.cgi/en-nut-discussion
>