[En-Nut-Discussion] Problem programming EtherNUT

[Harald Kipp]

I meant there is a STK500.exe in the distribution.

I'm heading home now,
Harald

At 21:30 06.06.2005 +0200, you wrote:
>Harald,
>
>We also say the same in spanish :)
>
>Do you mean the uisp.exe in tools/win32? Does it work the same way as the
>sk500.exe? I mean, changing the link in ICCAVR, it will work?
>
>Regards,
>Carlos.
>
>-----Mensaje original-----
>De: en-nut-discussion-bounces at egnite.de
>[mailto:en-nut-discussion-bounces at egnite.de] En nombre de Harald Kipp
>Enviado el: lunes, 06 de junio de 2005 19:39
>Para: Ethernut User Chat (English)
>Asunto: Re: [En-Nut-Discussion] Problem programming EtherNUT
>
>Carlos,
>
>As we say in Germany: "Sometimes you can't see the forest because of all the
>trees."
>
>The one in the Ethernut Distribution (tools/win32) works here.
>
>Harald
>
>At 19:15 06.06.2005 +0200, you wrote:
> >Hi Harald,
> >
> >I have thought the same, and I have been searching for an old
> >stk500.exe version. I've found one in:
> >http://www.avrfreaks.net/index.php?module=FreaksFiles&func=viewFile&id=
> >494&showinfo=1
> >
> >It is version 1.2, and although this one detects the Programmer, still
> >fails to programthe micro.
> >
> >I have not tried the AVRStudio programmer yet.
> >
> >If I find how to solve the problem I'll say it!!
> >
> >Can anybody send me his working stk500.exe, please? It is set in the
> >Atmel
> >directory:
> >
> >..\Atmel\AVR Tools\STK500\Stk500.exe
> >
> >Thanks,
> >Carlos.
> >
> > > Hi Carlos,
> > >
> > > just stepped into the same trouble. After removing all previous
> > > versions of AVRStudio and installing the latest Ver 4.11.410 with
> > > Service Pack 3, I'm unable to program Ethernut 2.1 via ImageCraft V7
> > > and the new SP Duo Programmer. Grabbing an old STK500.exe might
> > > help...I just have to find one...grrrrr!
> > >
> > > How about using the AVRStudio programmer? Does this still work for
> > > you?
> > >
> > > You may also create a simple batch file to use uisp. From my
> > > experience these Open Source programmers work quite reliable.
> > >
> > > Any other ideas how to overcome this monthly nightmare?
> > >
> > > Harald
> > >
> > > At 18:31 06.06.2005 +0200, you wrote:
> > >>Hello all,
> > >>
> > >>I have a problem when I try to program a Ethernut 2 rev A board with
> > >>the SISP Hardware.
> > >>
> > >>I used to program it from ICCAVR (version 6.31A) without problems,
> > >>but last friday I deleted AVRStudio from my PC because I needed some
> > >>extra space. Now I have reinstaled it from:
> > >>http://www.atmel.com/dyn/products/tools_card.asp?tool_id=2725
> > >>
> > >>and when I try to program the Ethernut board with the ICCAVR it says:
> > >>
> > >>""C:\Archivos de programa\Atmel\AVR Tools\STK500\Stk500.exe" -z
> > >>-dATMega128 -ccom1
> > >>STK500 command line programmer, v 2.1 Atmel Corp (C) 2004.
> > >>
> > >>Could not connect to STK500 V2 on com1
> > >>Done: there are error(s). Exit code: 1"
> > >>
> > >>I have tried what Harald said in the thread:
> > >>http://www.egnite.de/pipermail/en-nut-discussion/2003-October/001269
> > >>.html
> > >>
> > >>and when I press ctrl+x it returns:
> > >>SISP 1.1.1  Copyright 2002-2003 by egnite Software GmbH
> > >>
> > >>Anybody can help me please? Is it possible that the stk500.exe
> > >>version of the AVRStudio is not compatible with ICCAVR?
> > >>
> > >>Many thanks in advance and regards,
> > >>Carlos.
> > >
> > > _______________________________________________
> > > En-Nut-Discussion mailing list
> > > En-Nut-Discussion at egnite.de
> > > http://www.egnite.de/mailman/listinfo.cgi/en-nut-discussion
> > >
> >
> >
> >_______________________________________________
> >En-Nut-Discussion mailing list
> >En-Nut-Discussion at egnite.de
> >http://www.egnite.de/mailman/listinfo.cgi/en-nut-discussion
>
>_______________________________________________
>En-Nut-Discussion mailing list
>En-Nut-Discussion at egnite.de
>http://www.egnite.de/mailman/listinfo.cgi/en-nut-discussion
>
>
>_______________________________________________
>En-Nut-Discussion mailing list
>En-Nut-Discussion at egnite.de
>http://www.egnite.de/mailman/listinfo.cgi/en-nut-discussion