[En-Nut-Discussion] Problem programming EtherNUT

[Carlos]

Harald,

We also say the same in spanish :)

Do you mean the uisp.exe in tools/win32? Does it work the same way as the
sk500.exe? I mean, changing the link in ICCAVR, it will work?

Regards,
Carlos. 

-----Mensaje original-----
De: en-nut-discussion-bounces at egnite.de
[mailto:en-nut-discussion-bounces at egnite.de] En nombre de Harald Kipp
Enviado el: lunes, 06 de junio de 2005 19:39
Para: Ethernut User Chat (English)
Asunto: Re: [En-Nut-Discussion] Problem programming EtherNUT

Carlos,

As we say in Germany: "Sometimes you can't see the forest because of all the
trees."

The one in the Ethernut Distribution (tools/win32) works here.

Harald

At 19:15 06.06.2005 +0200, you wrote:
>Hi Harald,
>
>I have thought the same, and I have been searching for an old 
>stk500.exe version. I've found one in:
>http://www.avrfreaks.net/index.php?module=FreaksFiles&func=viewFile&id=
>494&showinfo=1
>
>It is version 1.2, and although this one detects the Programmer, still 
>fails to programthe micro.
>
>I have not tried the AVRStudio programmer yet.
>
>If I find how to solve the problem I'll say it!!
>
>Can anybody send me his working stk500.exe, please? It is set in the 
>Atmel
>directory:
>
>..\Atmel\AVR Tools\STK500\Stk500.exe
>
>Thanks,
>Carlos.
>
> > Hi Carlos,
> >
> > just stepped into the same trouble. After removing all previous 
> > versions of AVRStudio and installing the latest Ver 4.11.410 with 
> > Service Pack 3, I'm unable to program Ethernut 2.1 via ImageCraft V7 
> > and the new SP Duo Programmer. Grabbing an old STK500.exe might 
> > help...I just have to find one...grrrrr!
> >
> > How about using the AVRStudio programmer? Does this still work for 
> > you?
> >
> > You may also create a simple batch file to use uisp. From my 
> > experience these Open Source programmers work quite reliable.
> >
> > Any other ideas how to overcome this monthly nightmare?
> >
> > Harald
> >
> > At 18:31 06.06.2005 +0200, you wrote:
> >>Hello all,
> >>
> >>I have a problem when I try to program a Ethernut 2 rev A board with 
> >>the SISP Hardware.
> >>
> >>I used to program it from ICCAVR (version 6.31A) without problems, 
> >>but last friday I deleted AVRStudio from my PC because I needed some 
> >>extra space. Now I have reinstaled it from:
> >>http://www.atmel.com/dyn/products/tools_card.asp?tool_id=2725
> >>
> >>and when I try to program the Ethernut board with the ICCAVR it says:
> >>
> >>""C:\Archivos de programa\Atmel\AVR Tools\STK500\Stk500.exe" -z
> >>-dATMega128 -ccom1
> >>STK500 command line programmer, v 2.1 Atmel Corp (C) 2004.
> >>
> >>Could not connect to STK500 V2 on com1
> >>Done: there are error(s). Exit code: 1"
> >>
> >>I have tried what Harald said in the thread:
> >>http://www.egnite.de/pipermail/en-nut-discussion/2003-October/001269
> >>.html
> >>
> >>and when I press ctrl+x it returns:
> >>SISP 1.1.1  Copyright 2002-2003 by egnite Software GmbH
> >>
> >>Anybody can help me please? Is it possible that the stk500.exe 
> >>version of the AVRStudio is not compatible with ICCAVR?
> >>
> >>Many thanks in advance and regards,
> >>Carlos.
> >
> > _______________________________________________
> > En-Nut-Discussion mailing list
> > En-Nut-Discussion at egnite.de
> > http://www.egnite.de/mailman/listinfo.cgi/en-nut-discussion
> >
>
>
>_______________________________________________
>En-Nut-Discussion mailing list
>En-Nut-Discussion at egnite.de
>http://www.egnite.de/mailman/listinfo.cgi/en-nut-discussion

_______________________________________________
En-Nut-Discussion mailing list
En-Nut-Discussion at egnite.de
http://www.egnite.de/mailman/listinfo.cgi/en-nut-discussion