[En-Nut-Discussion] Second RS232 port

[Henrik Maier]

eboot in it's current form is is hardware dependant and currently 
requires an AVR with Atmega128 or Atmega103 register structure 
(flash.S), Ethernut compatible EEPROM simulation (ether.c) and base 
address at 0x8300 (rtlregs.h).

However it can be easily adjusted by modifying these files.

Henrik
http://www.proconx.com


przemo c. wrote:
> Hallo again!
> I have one simple quesiton:
> Is eboot hardware independent? By that i mean will it work on MMnet02 as
> well as on Ethernut 1.3 g or any other rtl8019as-based board?
> Are there any ajustments in makefile (makedef, makerules or Userconf.mk)
> required?
> P.s. ok. two questions.
> Regards Przemo.
> _______________________________________________
> En-Nut-Discussion mailing list
> En-Nut-Discussion at egnite.de
> http://www.egnite.de/mailman/listinfo.cgi/en-nut-discussion
> 
> 
>