[En-Nut-Discussion] Problem with source board layout

[riv at asvt.ru]

file for eagle enut130g.zip - do not have only power layer 
in brd file. :(
you must see it., please place on site normal version of 
layouts 130g device :(

all other files enut2, and enut3 have the power layer and 
ground layer.


On Wed, 15 Feb 2006 01:30:00 +0300
  <riv at asvt.ru> wrote:
>I'm unihide all layers in eagle and don't see result :(
>i'm see 2-layer (red, blue - top and bottom layout.) and 
>more nothing.
>
>
>please help !! :)
>
>how i'm can view this super hide layers in eagle ?
>
>On Tue, 14 Feb 2006 23:02:28 +0800
>  John Lin <0chiehchen at gmail.com> wrote:
>>I had the same mistake before... then I found you have to 
>>unhide those other
>>layers, so you can see all layers...
>>
>>
>>On 2/14/06, riv at asvt.ru <riv at asvt.ru> wrote:
>>>
>>>From Eagle files ethernut. registred version of eagle ,
>>>i'm view only 2-layer board. :(
>>>
>>>
>>>
>>>On Tue, 14 Feb 2006 10:19:51 +0100
>>>  Harald Kipp <harald.kipp at egnite.de> wrote:
>>>>At 21:44 12.02.2006 +0300, you wrote:
>>>>>Good afternoon,
>>>>>I collect a breadboard model of the device ethernut 
>>>1.3
>>>>>rev G from eagle files. etc..
>>>>>
>>>>>I have found that on the scheme is not present layout 
>>>VCC
>>>>>(eagle format)
>>>>>
>>>>>I'm very much to look photos of the original 1.3G from 
>>>a
>>>>>bottom side, please to any friends - send me photo.
>>>>>
>>>>>Also I had a question, in an original breadboard model
>>>>>are used two-layer or three-layer layout?
>>>>
>>>>I do not have any photo available from the backside and
>>>>IMHO
>>>>it is not required. Please take a look to the Eagle 
>>>board
>>>>files at
>>>>http://www.ethernut.de/en/download/index.html
>>>>
>>>>All Ethernut PCBs are 4 layer with ground and Vcc
>>>>in the two inner layers.
>>>>
>>>>Hope this answered your questions,
>>>>
>>>>Harald
>>>>
>>>>_______________________________________________
>>>>En-Nut-Discussion mailing list
>>>>En-Nut-Discussion at egnite.de
>>>>http://www.egnite.de/mailman/listinfo.cgi/en-nut-discussion
>>>
>>>_______________________________________________
>>>En-Nut-Discussion mailing list
>>>En-Nut-Discussion at egnite.de
>>>http://www.egnite.de/mailman/listinfo.cgi/en-nut-discussion
>>>
>>_______________________________________________
>>En-Nut-Discussion mailing list
>>En-Nut-Discussion at egnite.de
>>http://www.egnite.de/mailman/listinfo.cgi/en-nut-discussion
>
>_______________________________________________
>En-Nut-Discussion mailing list
>En-Nut-Discussion at egnite.de
>http://www.egnite.de/mailman/listinfo.cgi/en-nut-discussion