[En-Nut-Discussion] Problem with source board layout

[riv at asvt.ru]

I'm unihide all layers in eagle and don't see result :(
i'm see 2-layer (red, blue - top and bottom layout.) and 
more nothing.


please help !! :)

how i'm can view this super hide layers in eagle ?

On Tue, 14 Feb 2006 23:02:28 +0800
  John Lin <0chiehchen at gmail.com> wrote:
>I had the same mistake before... then I found you have to 
>unhide those other
>layers, so you can see all layers...
>
>
>On 2/14/06, riv at asvt.ru <riv at asvt.ru> wrote:
>>
>> From Eagle files ethernut. registred version of eagle ,
>> i'm view only 2-layer board. :(
>>
>>
>>
>> On Tue, 14 Feb 2006 10:19:51 +0100
>>   Harald Kipp <harald.kipp at egnite.de> wrote:
>> >At 21:44 12.02.2006 +0300, you wrote:
>> >>Good afternoon,
>> >>I collect a breadboard model of the device ethernut 
>>1.3
>> >>rev G from eagle files. etc..
>> >>
>> >>I have found that on the scheme is not present layout 
>>VCC
>> >>(eagle format)
>> >>
>> >>I'm very much to look photos of the original 1.3G from 
>>a
>> >>bottom side, please to any friends - send me photo.
>> >>
>> >>Also I had a question, in an original breadboard model
>> >>are used two-layer or three-layer layout?
>> >
>> >I do not have any photo available from the backside and
>> >IMHO
>> >it is not required. Please take a look to the Eagle 
>>board
>> >files at
>> >http://www.ethernut.de/en/download/index.html
>> >
>> >All Ethernut PCBs are 4 layer with ground and Vcc
>> >in the two inner layers.
>> >
>> >Hope this answered your questions,
>> >
>> >Harald
>> >
>> >_______________________________________________
>> >En-Nut-Discussion mailing list
>> >En-Nut-Discussion at egnite.de
>> >http://www.egnite.de/mailman/listinfo.cgi/en-nut-discussion
>>
>> _______________________________________________
>> En-Nut-Discussion mailing list
>> En-Nut-Discussion at egnite.de
>> http://www.egnite.de/mailman/listinfo.cgi/en-nut-discussion
>>
>_______________________________________________
>En-Nut-Discussion mailing list
>En-Nut-Discussion at egnite.de
>http://www.egnite.de/mailman/listinfo.cgi/en-nut-discussion