[En-Nut-Discussion] AT91SAM7x PPP

Jae Kim jkim0130 at gmail.com
Fri Aug 15 17:39:05 CEST 2008


Thanks for the information.  I feel more confident now and I'll give it a
try.

Thanks,
Jae

On Fri, Aug 15, 2008 at 2:20 AM, Chris Gude <cg at tis-net.de> wrote:

> Some time ago I discovered a "failure" in the old ppp-driver which
> occured when using ppp with hardware-handshake on. The failure was, that
> the flag for the flank-triggered interrupt was somehow overriden.
> Instead of triggering on a falling flank it triggered on low-level and
> got stuck.
> Another failure appeared as I connected the Ethernut-Board via a modem
> to a Windows PC as it sends a long option. Because of that Nut/OS
> overrides some data in the paket and gets stuck in a endless loop, as it
> needs this data to go onwards.
>
> Maybe on of these failures could be the reason why it doens't work on
> the AT91SAM7X. But that should only occur, when you changed the
> hardware-handshake flag or if you connected the new board to another
> device.
>
> Regards,
>
> Chris
>
> Szemző András schrieb:
> > hi,
> >
> > There is an experimental driver in the dist, what is for uart1. It
> doesn't
> > work in the current state on uart0, but it's not a big deal to modify.
> > The ppp example has to be work with this driver after some slight
> > modification on the PPPDEV, PPPCOM defines.
> >
> > Regards,
> > Andras
> >
> >
> >> -----Original Message-----
> >> From: en-nut-discussion-bounces at egnite.de
> >> [mailto:en-nut-discussion-bounces at egnite.de] On Behalf Of Jae Kim
> >> Sent: Friday, August 15, 2008 12:00 AM
> >> To: en-nut-discussion at egnite.de
> >> Subject: [En-Nut-Discussion] AT91SAM7x PPP
> >>
> >> Hi,
> >>
> >> Does the PPP stack work on the AT91SAM7X platform?  I'm
> >> asking because the pppc sample only works with the ATmega128
> >> processor.
> >>
> >> Thanks,
> >> Jae
> >> _______________________________________________
> >> http://lists.egnite.de/mailman/listinfo/en-nut-discussion
> >>
> >>
> >
> >
> > ----
> > Kometa 99 Élelmiszeripari ZRt.
> > Székhely: 7400 Kaposvár, Pécsi u. 67-69., Levelezési cím: 7401 Kaposvár,
> Pf. 58
> > Cégszám: Somogy Megyei Bíróság mint Cégbíróság 14-10-300239
> > Adószám: 13749619-2-44
> > Telefon: 82/502-400, Fax: 82/502-415
> > http://www.kometa.hu
> > http://www.kemencessult.hu
> >
> > _______________________________________________
> > http://lists.egnite.de/mailman/listinfo/en-nut-discussion
> >
> >
>
> _______________________________________________
> http://lists.egnite.de/mailman/listinfo/en-nut-discussion
>


More information about the En-Nut-Discussion mailing list