[En-Nut-Discussion] SAM9260-EK getting started

[steve]

Harald, Zack,

  Get this result with webradio.bin in SDRAM...

   SAM Internet Radio 1.0.2 - Nut/OS 4.3.1.0
   66959703 bytes free
   CPU Clock   : 90316800
   Master Clock: 90316800
   Register eth0...No Ethernet, retry
   Register eth0...No Ethernet, retry
   Register eth0...No Ethernet, retry
   Register eth0...No Ethernet, retry
   :::::::::

  BUT Atmel's emacs samples work ok.
  Thanks again.

Cheers,
Steve.

At 16:05 11/07/2008, you wrote:
>steve wrote:
> >   I tried the discoverer, but it didn't discover anything.
> >   I assume that if the ethernet device failed registration then the
> >   IP stack isn't going to be running.
>
>You may try the radio binary
>http://www.ethernut.de/en/documents/sam-web-radio.html
>
>It won't fully work, because you'd need the Calypso Board. But it should
>link to the Ethernet. This way you know, that either your hardware is
>possibly broken or the Nut/OS or compiler setup causes the problems.
>
>Btw. you checked your Ethernet switch and cables, don't you?
>
>Harald
>
>_______________________________________________
>http://lists.egnite.de/mailman/listinfo/en-nut-discussion