[En-Nut-Discussion] Problem programming EtherNUT

[Harald Kipp]

Carlos,

As we say in Germany: "Sometimes you can't see the forest
because of all the trees."

The one in the Ethernut Distribution (tools/win32) works here.

Harald

At 19:15 06.06.2005 +0200, you wrote:
>Hi Harald,
>
>I have thought the same, and I have been searching for an old stk500.exe
>version. I've found one in:
>http://www.avrfreaks.net/index.php?module=FreaksFiles&func=viewFile&id=494&showinfo=1
>
>It is version 1.2, and although this one detects the Programmer, still
>fails to programthe micro.
>
>I have not tried the AVRStudio programmer yet.
>
>If I find how to solve the problem I'll say it!!
>
>Can anybody send me his working stk500.exe, please? It is set in the Atmel
>directory:
>
>..\Atmel\AVR Tools\STK500\Stk500.exe
>
>Thanks,
>Carlos.
>
> > Hi Carlos,
> >
> > just stepped into the same trouble. After removing all previous
> > versions of AVRStudio and installing the latest Ver 4.11.410
> > with Service Pack 3, I'm unable to program Ethernut 2.1 via
> > ImageCraft V7 and the new SP Duo Programmer. Grabbing an old
> > STK500.exe might help...I just have to find one...grrrrr!
> >
> > How about using the AVRStudio programmer? Does this still
> > work for you?
> >
> > You may also create a simple batch file to use uisp. From my
> > experience these Open Source programmers work quite reliable.
> >
> > Any other ideas how to overcome this monthly nightmare?
> >
> > Harald
> >
> > At 18:31 06.06.2005 +0200, you wrote:
> >>Hello all,
> >>
> >>I have a problem when I try to program a Ethernut 2 rev A board with the
> >>SISP Hardware.
> >>
> >>I used to program it from ICCAVR (version 6.31A) without problems, but
> >>last friday I deleted AVRStudio from my PC because I needed some extra
> >>space. Now I have reinstaled it from:
> >>http://www.atmel.com/dyn/products/tools_card.asp?tool_id=2725
> >>
> >>and when I try to program the Ethernut board with the ICCAVR it says:
> >>
> >>""C:\Archivos de programa\Atmel\AVR Tools\STK500\Stk500.exe" -z
> >>-dATMega128 -ccom1
> >>STK500 command line programmer, v 2.1 Atmel Corp (C) 2004.
> >>
> >>Could not connect to STK500 V2 on com1
> >>Done: there are error(s). Exit code: 1"
> >>
> >>I have tried what Harald said in the thread:
> >>http://www.egnite.de/pipermail/en-nut-discussion/2003-October/001269.html
> >>
> >>and when I press ctrl+x it returns:
> >>SISP 1.1.1  Copyright 2002-2003 by egnite Software GmbH
> >>
> >>Anybody can help me please? Is it possible that the stk500.exe version of
> >>the AVRStudio is not compatible with ICCAVR?
> >>
> >>Many thanks in advance and regards,
> >>Carlos.
> >
> > _______________________________________________
> > En-Nut-Discussion mailing list
> > En-Nut-Discussion at egnite.de
> > http://www.egnite.de/mailman/listinfo.cgi/en-nut-discussion
> >
>
>
>_______________________________________________
>En-Nut-Discussion mailing list
>En-Nut-Discussion at egnite.de
>http://www.egnite.de/mailman/listinfo.cgi/en-nut-discussion