[En-Nut-Discussion] Problems Programming Ethernut Starter Kit 2.1

[Victor Behar]

All my troubles seemed so far away.... when I used AVRStudio 4.07 build
240....
possibly this service pack is a bit nasty, since Atmel is showing a tendency
to "close"
the "open"  programming tools ...





----- Original Message -----
From: "Victor Behar" <wayward at panafonet.gr>
To: <en-nut-discussion at egnite.de>
Sent: Friday, November 11, 2005 7:23 PM
Subject: [En-Nut-Discussion] Problems Programming Ethernut Starter Kit 2.1


> Greetings to all,
>
> I am using  Ethernut Starter Kit 2.1 with WinAVR and AVR Studio 4.11 SP3
> and I have problems programming the board. A description of symptoms
follows
> ...
>
> -when i connect JTAG of  SP Duo to COM1 and run AVRStudio, the AVRStudio
> "sees" it as
> (Platform) STK500 or AVRISP and requests firmware downgrade from 31.32 to
> 2.01 ?
> I would expect to be able to connect as JTAGICE mkII.
>
> -however, fuses can be read or programmed without a problem (in this
STK500
> mode)
> -hex files looks like they can be downloaded and verified when they are
> "simple".hex (or the example led01.hex),
> -others like httpd.hex get downloaded but AVRStudio returns "Problems
> encountered..."
> -but even with very simple code that sets bits of PORTD, I can't get it
> work.
>
> --------------------------------------------------------------------------
--
> --------------------------------
>
> The other issue is when I compile httpd.c I get...
>
> > "make.exe" all
>
avr-gcc -c -mmcu=atmega128 -Os -fno-delete-null-pointer-checks -Wall -Wstric
>
t-prototypes -Wa,-ahlms=httpserv.lst -D__HARVARD_ARCH__ -DETHERNUT2 -Ic:/eth
> ernut-3.9.8/nutbld/include -Ic:/ethernut-3.9.8/nut/include  httpserv.c -o
> httpserv.o
> httpserv.c: In function `ShowSockets':
> httpserv.c:311: warning: assignment discards qualifiers from pointer
target
> type
> httpserv.c:314: warning: assignment discards qualifiers from pointer
target
> type
> httpserv.c:317: warning: assignment discards qualifiers from pointer
target
> type
> httpserv.c:320: warning: assignment discards qualifiers from pointer
target
> type
> httpserv.c:323: warning: assignment discards qualifiers from pointer
target
> type
> httpserv.c:326: warning: assignment discards qualifiers from pointer
target
> type
> httpserv.c:329: warning: assignment discards qualifiers from pointer
target
> type
> httpserv.c:332: warning: assignment discards qualifiers from pointer
target
> type
> httpserv.c:335: warning: assignment discards qualifiers from pointer
target
> type
> httpserv.c:338: warning: assignment discards qualifiers from pointer
target
> type
> httpserv.c:341: warning: assignment discards qualifiers from pointer
target
> type
> httpserv.c:344: warning: assignment discards qualifiers from pointer
target
> type
> crurom -r -ourom.c sample
>
avr-gcc -c -mmcu=atmega128 -Os -fno-delete-null-pointer-checks -Wall -Wstric
>
t-prototypes -Wa,-ahlms=urom.lst -D__HARVARD_ARCH__ -DETHERNUT2 -Ic:/ethernu
> t-3.9.8/nutbld/include -Ic:/ethernut-3.9.8/nut/include  urom.c -o urom.o
> avr-gcc httpserv.o
>
urom.o -mmcu=atmega128 -Wl,--defsym=main=0,-Map=httpserv.map,--cref -Lc:/eth
> ernut-3.9.8/nutbld/lib  c:/ethernut-3.9.8/nutbld/lib/nutinit.o
>
c:/ethernut-3.9.8/nutbld/dev/lanc111.o -lnutnet -lnutpro -lnutfs -lnutos -ln
> utdev -lnutnet -lnutcrt -o httpserv.elf
> avr-objcopy -R .eeprom -O ihex httpserv.elf httpserv.hex
> rm httpserv.elf
>
> > Process Exit Code: 0.......
>
>
>
> so, what do you think of these warnings?
>
>
> Thank you
>
>
> Regards,
>
> Victor Behar
>
> _______________________________________________
> En-Nut-Discussion mailing list
> En-Nut-Discussion at egnite.de
> http://www.egnite.de/mailman/listinfo.cgi/en-nut-discussion