[En-Nut-Discussion] how to program the ethernut

[Franck]

Hi,

could you send your scheme on the list, and the correct one after checking
on the list too, because I'm planning to use ponyprog to program my charon2
module.

Thanks

+-----Message d'origine-----
+De : en-nut-discussion-bounces at egnite.de
+[mailto:en-nut-discussion-bounces at egnite.de]De la part de Klemen Dovrtel
+Envoyé : samedi 26 novembre 2005 12:51
+À : Ethernut User Chat (English)
+Objet : Re: [En-Nut-Discussion] how to program the ethernut
+
+
+uC=microcontroller
+Ponyprog is ok, i can program atmega8.
+Would you please send me the scheme of programmer you
+use.
+Best regards
+
+--- Thiago A. Corrêa <thiago.correa at gmail.com> wrote:
+
+> I don't know what is uC, but a locked processor does
+> read "something"
+> in the ponyprog, it reads some garbage data, but
+> doesn't give you
+> "device not found". I do know that it is a bit hard
+> to setup pony, it
+> had issues with many pcs where I work... something
+> with the LPT that I
+> can't quite figure out. One thing I always do is set
+> it to ECC+EPP in
+> the bios, seams to work sometimes. Also, my working
+> machine has the
+> LPT1 in 0x378, that info might be helpfull.
+>
+> I don't have the scheme for the programmer I'm using
+> right now, but I
+> can send you a link on monday if you want, we built
+> ours with some
+> spare parts, not hard to assemble :)
+>
+> On 11/25/05, Klemen Dovrtel
+> <klemen_dovrtel at yahoo.com> wrote:
+> > I connected the vcc, gnd, miso, mosi, sck and rst
+> (i
+> > removed r22 and added r34) to my ponyprog
+> programmer
+> > and try to read data from uC, but i get an error
+> > (device missing). I am shure that the connsetions
+> are
+> > ok, and the programmer is ok. The ethernut board
+> is
+> > new. Why is that? Is the uC locked?
+> >
+> >
+> >
+> > __________________________________
+> > Yahoo! Music Unlimited
+> > Access over 1 million songs. Try it free.
+> > http://music.yahoo.com/unlimited/
+> > _______________________________________________
+> > En-Nut-Discussion mailing list
+> > En-Nut-Discussion at egnite.de
+> >
+>
+http://www.egnite.de/mailman/listinfo.cgi/en-nut-discussion
+> >
+> _______________________________________________
+> En-Nut-Discussion mailing list
+> En-Nut-Discussion at egnite.de
+>
+http://www.egnite.de/mailman/listinfo.cgi/en-nut-discussion
+>
+
+
+
+
+
+__________________________________
+Yahoo! Mail - PC Magazine Editors' Choice 2005
+http://mail.yahoo.com
+_______________________________________________
+En-Nut-Discussion mailing list
+En-Nut-Discussion at egnite.de
+http://www.egnite.de/mailman/listinfo.cgi/en-nut-discussion
+