[En-Nut-Discussion] Ethernut not running stable

[Erich]

Harald Kipp schrieb:
> Hi Erich,
>
> On 18.11.2010 22:10, Erich wrote:
>   
>> the ethernut 3.0 rev has the dm9000ep on it, shouldnt be the problem there?
>>     
>
> I'm a bit confused and can't really follow and find out what you did so far.
>
> You mean you changed
>
>   #define NUT_THREAD_NICRXSTACK   384
>
> to
>
>   #define NUT_THREAD_NICRXSTACK   768
>
> in arch/arm/dev/at91_emac.c? Then you rebuilt the system and the
> httpserv binary, right? And the problem still exists.
>   

yes
> You are using the same compiler version that was used to test 4.8.8 and
> to create the pre-build binaries, so that shouldn't be the problem.
>   

arm gcc 4.2.2 on windows
> You also tried the ready built binary
>
>  nut\bin\boards\ethernut30e\arm-gcc\httpserv.bin
>
> using the boot loader and it shows the same problem, doesn't it?
>   

no i used a jtag adapter

nut run ...
> Sorry for repeating all this. It's just to make sure, that I got it.
>
> Thanks,
>
> Harald
>
>
> _______________________________________________
> http://lists.egnite.de/mailman/listinfo/en-nut-discussion
>
>   
erich